Dynamic Object Examples

Dynamic Object Examples

This page shows example usages of various dynamic objects included in Awning Composer. Each example includes a list of all changes to default parameters as well as any other steps taken. You can use these examples to get an idea of what's possible and how to go about setting up your own customized objects.

The examples are listed in alphabetical order by object name.

Box Enclosure - Entrance enclosure

Dimensions:
   Width: 6’
   Depth: 5’
Main:
   Back height: 8’ 6”
   Front height: 7’ 6”
   Top rafter spacing: 1’ 6”
   Front support spacing: 1’ 6”
   Side support spacing: 1’ 8”
   Has back wall: [Unchecked]
Options:
   Combined spaced parts: [Unchecked]
Object Parts:
   Front interim down bar: [Invisible]
Material:
   Opacity .8 for all fabric just to show what frame looks like
   Obscure Front fabric with Vertical plane to create a doorway
   Obscure Front bottom bar with Vertical plane at bottom of doorway
(For more info, see “Obscuring Objects” in the Awning Composer Help documentation)

Box Enclosure - Portable showroom

Dimensions:
   Width: 18’
   Depth: 8’
Main:
   Back height: 9’
   Front height: 7’
   Top rafter spacing: 2’
   Side support spacing: [Unchecked]
   Has front wall: [Unchecked]
Material:
   Set opacity to 0.8 for Left/Right fabric
Graphics:
   Added leaf logo to Left/Right fabric
Green panel at top:
   Lined up “Line for Valance” object with front edge of Top fabric and then applied Straight (no braid) valance with Forest Green Sunbrella fabric

Concave - Sign band

Dimensions:
   Width: 6’
   Height: 2’
   Depth: 2’
Sign Band:
   SB height: 6” [Checked]
Materials:
   Applied Sunbrella Spa fabric

Convex - Different colored sign band

Dimensions:
   Width: 6’
   Height: 2’
   Depth: 2’
Sign Band:
   SB height: 6” [Checked]
   Separate SB fabric: [Checked]
Materials:
   Applied Sunbrella Logo Red fabric to entire awning.
   Selected each sign band section individually and applied Sunbrella Natural fabric.
Text
   Selected sign band front fabric and applied text.

Convex - 1" x 2" hanging bar

Dimensions:
   Width: 6’
   Height: 2’
   Depth: 2’
Main:
    Has hanging bar: [Checked]

Convex - Wraparound inside corner

Dimensions:
   Width: 6’
   Height: 2’
   Depth: 2’
Other awnings:
   Added Convex Inside Corner to right side of Convex.
   Added 2nd Convex with same settings as 1st Convex.
Materials:
   Applied Sunbrella Linen fabric

Convex - Wraparound round corner with sign band

Dimensions:
   Width: 6’
   Height: 2’
   Depth: 2’
Sign Band:
   SB height: 6” [Checked]
Other awnings:
   Added Convex Round Corner to left side of Convex.
   Added 2nd Convex with same settings as 1st Convex.
Materials:
   Applied Sunbrella Linen fabric

Convex - Wraparound square corner

Dimensions:
   Width: 6’
   Height: 2’
   Depth: 2’
Other awnings:
   Added Convex Square Corner to left side of Convex.
   Added 2nd Convex with same settings as 1st Convex.
Materials:
   Applied Sunbrella Linen fabric

Dome

Dimensions:
   Width: 4’
   Height: 2’
   Depth: 2’
Valance:
   Added Wave 1 valance
Materials:
   Applied Sunbrella Terracotta fabric to entire awning
   Applied Turquoise to braid

Double Loose Frame - Moderate depth

Dimensions:
   Width: 6’
   Height: 4’
   Depth: 3’
Main:
   Mid bar angle: 35 degrees
   Mid bar length: 3’ 6”
Valance:
   Wave1
Material:
   Opacity: 0.75

Double Loose Frame - Maximum depth

Dimensions:
   Width: 6’
   Height: 4’
   Depth: 3’
Main:
   Mid bar angle: 42 degrees
   Mid bar length: 4’
Valance:
   Wave1
Material:
   Opacity: 0.75

Exterior Screen - Enclosed track

Dimensions:
   Width: 6’
   Height: 4’
Main:
   Percent down: 80%
   Screen style: Enclosed track

Exterior Screen - Vertical drop

Dimensions:
   Width: 6’
   Height: 4’
Main:
   Percent down: 100%
   Screen style: Vertical drop

Exterior Screen - Cable

Dimensions:
   Width: 6’
   Height: 4’
Main:
   Percent down: 100%
   Screen style: Cable

Gable Marquee – King trusses every rafter

Dimensions:
   Width: 8’
   Height: 3’
   Depth: 8’
Trusses:
   Front truss type: King truss
   Back truss type: King truss
   Internal truss type: King truss
   Internal truss spacing: 2’

Gable Marquee – Gable trusses every other rafter

Dimensions:
   Width: 8’
   Height: 3’
   Depth: 8’
Main:
   Internal support spacing: 4’
Trusses:
   Front truss type: Gable truss
   Back truss type: Gable truss
   Internal truss type: Gable truss
   Internal truss spacing: 4’

Gable Marquee – King trusses on center support

Dimensions:
   Width: 8’
   Height: 3’
   Depth: 8’
Main:
   Internal support spacing: [Unchecked]
   Has center bar: [Checked]
Trusses:
   Front truss type: King truss
   Back truss type: King truss
   Internal truss type: King truss
   Internal truss spacing: 2’

Gable Marquee – Sign band, no internal supports

Dimensions:
   Width: 8’
   Height: 3’
   Depth: 8’
Main:
   Internal support spacing: [Unchecked]
   Has bottom bar: [Unchecked]
   Has back fabric: [Unchecked]
Sign Band:
   SB height: [Checked]
Trusses:
   Front truss type: King truss
   Back truss type: None
   Internal truss type: None

Gable Marquee – Queen front truss and poles

Dimensions:
   Width: 8’
   Height: 3’
   Depth: 8’
Main:
   Internal support spacing: [Unchecked]
   Has bottom bar: [Unchecked]
   Has back fabric: [Unchecked]
Sign Band:
   SB height: [Unchecked]
Trusses:
   Front truss type: Queen truss
   Back truss type: None
   Internal truss type: None
Poles:
   Pole height: 7’ [Checked]
   Pole diameter: 2”
   Pole type: Square
   Has front left pole/plate [Checked]
   Has front right pole/plate [Checked]
Pole Spacing:
   Left side spacing: 6’ [Checked]
   Right side spacing: 6’ [Checked]
   Indent from left: 1.5”
   Indent from right: 1.5”
   Indent from front: 1.5”
   Indent from back: 1.5”
   Indent from top: 0”

Gable Marquee – Sign band and rafter trusses

Dimensions:
   Width: 8’
   Height: 3’
   Depth: 8’
Main:
   Internal support spacing: [Unchecked]
   Has bottom bar: [Unchecked]
   Has back fabric: [Unchecked]
Sign Band:
   SB height: 6” [Checked]
   SB front support spacing: 2’
   SB side support spacing: 2’
Trusses:
   Front truss type: Rafter + king truss
   Back truss type: Rafter truss
   Internal truss type: Rafter truss
   Internal truss spacing: 2’
   Rafter truss height: 4”
   Rafter truss interval: 1’

Gable Marquee – Entrance canopy for sidewalk with landings

Dimensions:
   Width: 8’
   Height: 3’
   Depth: 6’
Main:
   Has bottom bar: [Checked]
   Has back fabric: [Checked]
Trusses:
   Front truss type: King truss
   Back truss type: King truss
   Internal truss type: King truss
   Internal truss spacing: 2’
Other awnings:
   Added Gable Marquee Top Corner to front of Gable Marquee
   Added 2nd Gable Marquee for the center section with 4’ depth
   Added Gable Marquee Bottom Corner to center Gable Marquee
   Added 3rd Gable Marquee with 6’ depth to complete the canopy
Valance:
   Added Wave1 valance

Gable Marquee – Entrance canopy for sidewalk with curves

Dimensions:
   Width: 8’
   Height: 3’
   Depth: 6’
Main:
   Has bottom bar: [Checked]
   Has back fabric: [Checked]
Trusses:
   Front truss type: King truss
   Back truss type: King truss
   Internal truss type: King truss
   Internal truss spacing: 2’
Other awnings:
   Added Gable Marquee Right Corner to front of Gable Marquee
   Added 2nd Gable Marquee for the center section with 6’ depth
   Added Gable Marquee Left Corner to center Gable Marquee
   Added 3rd Gable Marquee with 6’ depth to complete the canopy

Hipped Canopy – Upscale patio application

Dimensions:
   Width: 14’
   Height: 2’
   Depth: 8’
Main:
   Corner width: 4’
Sign Band:
   SB height: 8” [Checked]
Other objects:
   Added 2 Right Drapes and 2 Left Drapes as decorative accents

Hipped End – Entrance canopy with different colored sign band, text and graphics

Dimensions:
   Width: 8’
   Height: 3’
   Depth: 3’
Sign Band:
   SB height: 8” [Checked]
   Separate SB Fabric [Checked]
Other objects:
   Added text "Aquarium Entrance" to sign band
   Added fish graphic to Front fabric

Hipped Marquee – Entrance canopy with king trusses, sign band and lacing bar

Dimensions:
   Width: 8’
   Height: 3’
   Depth: 12’
Main:
   Hip depth: 4’
   Internal support spacing: 4’
   Lacing bar height: 3” [Checked]
   Has bottom bar: [Unchecked]
   Has back fabric: [Unchecked]
Sign Band:
   SB height: 10” [Checked]
Trusses:
   Front truss type: King truss
   Back truss type: King truss
   Internal truss type: King truss
   Hip rafter type: Multiple rafters

Hipped Marquee – King trusses and poles

Dimensions:
   Width: 6’
   Height: 2’
   Depth: 8’
Main:
   Hip depth: 3’
   Internal support spacing: 4’
   Has bottom bar: [Checked]
   Has center out bar: [Checked]
   Has back fabric: [Unchecked]
Trusses:
   Front truss type: King truss
   Back truss type: King truss
   Internal truss type: King truss
   Hip rafter type: Multiple + center
   Internal truss spacing: 4’
Poles:
   Pole height: 7’ [Checked]
   Pole diameter: 2”
   Pole type: Square
   Has front left pole/plate [Checked]
   Has front right pole/plate [Checked]
Pole Spacing:
   Left side spacing: 6’ [Checked]
   Right side spacing: 6’ [Checked]
   Indent from left: 1.5”
   Indent from right: 1.5”
   Indent from front: 1.5”
   Indent from back: 1.5”
   Indent from top: 0”

Hipped Traditional – Entrance canopy with different colored sign band and sides

Dimensions:
   Width: 8’
   Height: 4’
   Depth: 3’
Main:
   Corner width: 2’
Sign Band:
   SB height: 2” [Checked]
   Separate SB Fabric: [Checked]
Valance:
   Added Wave1 valance
Materials:
   Applied Forest Green to entire awning then selected Front fabric and applied Beaufort Forest Green Natural 6 Bar

Hipped Traditional – Left hip turned off

Dimensions:
   Width: 8’
   Height: 2’
   Depth: 2’
Main:
    Has left hip: [Unchecked]
Material:
   Applied Sunbrella Terracotta

Long Dome – Different colored sign band

Dimensions:
   Width: 10’
   Height: 2’
   Depth: 2’
Sign Band:
   SB height: 8” [Checked]
   Separate SB fabric: [Checked]
Materials:
   Applied Sunbrella Smoke fabric to entire awning.
   Selected each sign band section individually and applied Sunbrella Natural fabric.
Text
   Selected sign band front fabric and applied text.

Octagonal Canopy – Secondary trusses and vent

Dimensions:
   Width: 14’
   Height: 8’ 6”
Main:
   Peak offset: 1’
Sign Band:
   SB height: 6”
   SB support spacing: 1’ 10”
Vent:
   Has vent: [Checked]
   Vent diameter: 3’
   Vent height: 8”
   Vent overlap: 6”
   Vent truss height: 6”
   Vent truss support spacing: 1’
Trusses:
   Has secondary trusses: [Checked]
   Rib truss height: 4”
   Rib truss interval: 1’
Poles:
   Has poles: [Checked]
Materials:
   Applied Sunbrella Forest Green fabric to entire canopy.
   Applied Tan frame color to frame

Open Traditional – Window awning with spears

Dimensions:
   Width: 6’
   Height: 4’
   Depth: 3’
Main:
   Out bar angle: 52 degrees
   Internal out bar spacing: [Unchecked]
Valance:
   Added Wave1 valance
Materials:
   Applied Beaufort Forest Green Natural 6 Bar. Used Horizontal Offset slider in the Texture tab to adjust the stripes so they were even on each side of the awning.
Other Objects:
   Added spear from Misc. objects and used the "Rotate by" command on the Transform Object menu to rotate the spear 52 degrees on the X-axis. Moved the spear into place by locking the X, Y and Z axis as needed. Duplicated the spear, locked the X-axis and moved second spear into position on other side of the awning.

Open Traditional – Window awning for restaurant using custom fabric panels

Dimensions:
   Width: 6’
   Height: 3’
   Depth: 2’
Main:
   Out bar angle: 90 degrees
   Out bar height: 10”
   Internal out bar spacing: [Unchecked]
Sign Band:
   SB height: 4” [Checked]
   Separate SB Fabric: [Checked]
Materials:
   Applied Sunbrella Marine Blue fabric
   Applied Black frame color
Panels:
   Added Floating Panel 1 with width of 4” and offset of 12” from the left. Applied Sunbrella Hot Pink fabric.
   Added Floating Panel 2 with width of 4” and offset of 12” from the right. Applied Sunbrella Hot Pink fabric.
   Added Floating Panel 3 with width of 40” and offset of 16” from the left. Applied Sunbrella Parchment fabric.

Open Traditional – Window awning with dual attachment points

Dimensions:
   Width: 6’
   Height: 4’
   Depth: 3’
Main:
   Out bar angle: 90 degrees
   Out bar height: 14”
   Internal out bar spacing: [Unchecked]
   Aux. out bar height: 24” [Checked]
   Internal out bar spacing: [Unchecked]
   Internal auxiliary bar spacing: [Unchecked]

Open Traditional – Wrap around outside corner

Dimensions:
   Width: 6’
   Height: 4’
   Depth: 3’
Main:
   Out bar angle: 90 degrees
   Out bar height: 14”
   Internal out bar spacing: [Unchecked]
Other awnings:
   Added Open Traditional Corner to right side of Open Traditional
   Added 2nd Open Traditional with same settings as 1st Open Traditional.

Open Traditional – Valance on front and sides

Dimensions:
   Width: 6’
   Height: 4’
   Depth: 3’
Main:
   Out bar angle: 90 degrees
   Out bar height: 0”
   Internal out bar spacing: [Unchecked]
   Has out bar fabric: [Checked]
Valance:
   Added Wave1 valance
Materials:
   Applied Sunbrella Terra Cotta fabric

Open Traditional – Valance on front and winged valance on sides

Dimensions:
   Width: 6’
   Height: 4’
   Depth: 3’
Main:
   Out bar angle: 90 degrees
   Out bar height: 12”
   Internal out bar spacing: [Unchecked]
Valance:
   Added Wave1 valance
   Has winged valance: [Checked]
Materials:
   Applied Sunbrella Terra Cotta fabric

Pergola – Pergola with retractable top awning fabric

Dimensions:
   Width: 8.58’
   Height: 9’
   Depth: 8.58’
Top Fabric:
   Fabric separation: 8.5 [Checked]
Materials:
   Applied Sunbrella Havelock Brick fabric to awning

Pyramid – Pyramid canopy with center support trusses

Dimensions:
   Width: 8’
   Height: 2’
   Depth: 8’
Main:
   Has center bar: [Checked]
Sign Band:
   SB height: 6” [Checked]
   SB front spacing: 2’
   SB side spacing: 2’
Trusses:
   Gable truss interval: 2’ [Checked]

Pyramid – Pyramid canopy with sign band, poles and pole plates

Dimensions:
   Width: 8’
   Height: 4’
   Depth: 8’
Sign Band:
   SB height: 6” [Checked]
   SB front support spacing: 2’
   SB side support spacing: 2’
Trusses:
   Hip rafter type: Multiple rafters
   Front hip rafter interval: 2’
   Side hip rafter interval: 2’
Poles:
   Pole height: 7’ [Checked]
   Pole diameter: 2”
   Pole type: Square
   Has front left pole/plate [Checked]
   Has front right pole/plate [Checked]
   Has back left pole/plate [Checked]
   Has back right pole/plate [Checked]
Pole Spacing:
   Indent from left: 1.5”
   Indent from right: 1.5”
   Indent from front: 1.5”
   Indent from back: 1.5”
   Indent from top: 0”

Retractable – Half open retractable with elongated wave valance

Dimensions:
   Width: 10’
   Depth: 8’
Main:
   Arm pitch: 96%
   Percent open: 45%
   SB side spacing: 2’
Valance:
   Added Wave1 valance
   Changed valance height to 10”
   Changed number of cutouts to 10 (was 20)
Materials:
   Applied Sunbrella Terra Cotta fabric

Retractable Roof – Front and left drop shade

Dimensions:
   Width: 12’
   Height: 10’
   Depth: 8’
Main:
   Front height: 8’
   Has front drop shade: [Checked]
   Has left drop shade: [Checked]
   Percent top open: 100%
   Percent front down: 10%
   Percent left down: 30%
Materials:
   Applied Sunbrella Mediterranean Canvas Block Stripe fabric
   Applied Sand frame color
   Applied Brown Brick Herringbone texture to ground: turned on "Show all objects" under the Object Parts window, then selected the ground object and applied the texture. Under Texture tab, changed Horizontal and Vertical Repeat to 30” to reduce the size of the brick pattern.

Rigid Flat Panel – Marquee sign for theatre

Dimensions:
   Width: 6’
   Height: 2’
   Depth: 7’
Other objects:
   Added text "Crucible" to Front fabric
Materials:
   Applied a custom texture to fabric that was a white rectangle with a gray frame around it. Clicked on the "Image" button on the Texture tab to import the custom texture.
Used the Horizontal Repeat and Vertical Repeat sliders on the Texture tab to adjust the size of the custom texture. Clicked the Lock icon in the middle of the sliders to unlock them so they could be adjusted individually.

Round Marquee

Dimensions:
   Width: 8’
   Height: 3’
   Depth: 7’
Valance:
   Added Wave 1 valance
Materials:
   Applied Sunbrella Pacific Blue fabric to entire awning.

Round Marquee – Queen trusses and indented poles

Dimensions:
   Width: 8’
   Height: 3’
   Depth: 7’
Trusses:
   Front truss type: Queen truss
   Back truss type: Queen truss
   Internal truss type: Queen truss
Poles:
   Pole height: 7’ [Checked]
   Pole diameter: 2”
   Pole type: Square
   Has front left pole/plate [Checked]
   Has front right pole/plate [Checked]

Round Marquee – For sidewalk with landings

Dimensions:
   Width: 8’
   Height: 3’
   Depth: 6’
Main:
   Has bottom bar: [Checked]
   Has back fabric: [Checked]
Trusses:
   Front truss type: King truss
   Back truss type: King truss
   Internal truss type: King truss
   Internal truss spacing: 2’
Other awnings:
   Added Round Marquee Top Corner to front of Round Marquee
   Added 2nd Round Marquee for the center section with 4’ depth
   Added Round  Marquee Bottom Corner to center Round Marquee
   Added 3rd Round Marquee with 6’ depth to complete the canopy
Valance:
   Add Wave1 valance
Materials:
   Applied Sunbrella Persian Green fabric to entire awning

Round Marquee – For sidewalk with curves

Dimensions:
   Width: 8’
   Height: 3’
   Depth: 6’
Main:
   Has bottom bar: [Checked]
   Has back fabric: [Checked]
Trusses:
   Front truss type: King truss
   Back truss type: King truss
   Internal truss type: King truss
   Internal truss spacing: 2’
Other awnings:
   Added Round Marquee Right Corner to front of Round Marquee
   Added 2nd Round Marquee for the center section with 4’ depth
   Added Round  Marquee Left Corner to center Round Marquee
   Added 3rd Round Marquee with 6’ depth to complete the canopy
Materials:
   Applied Sunbrella Linen fabric to entire awning

Round Nose Traditional

Dimensions:
   Width: 6’
   Height: 1’ 6”
   Depth: 3’
Arc:
   Round nose height: 3”
   Round nose setback: 4”
   Rafter arc rise: 1”
Materials:
   Applied Sunbrella Beaufort Black/White 6-Bar fabric
Texture:
   Used Horizontal Offset slider to adjust the stripes so they were even on each side of the awning.

Rounded Traditional

Dimensions:
   Width: 6’
   Height: 2’
   Depth: 2’
Valance:
   Added Spanish valance
Materials:
   Applied Sunbrella Crest Denim fabric

Traditional – Patio awning with spreader bar and lacing bars

Dimensions:
   Width: 6’
   Height: 2’
   Depth: 7’
Main:
   Spreader bar spacing: 40” [Checked]
   Lacing bar height: 3” [Checked]

Traditional – Patio awning with sign band and rafter trusses

Dimensions:
   Width: 6’
   Height: 2’
   Depth: 9’
Main:
   Internal out bar spacing: [Unchecked]
Sign Band:
   SB height: 6” [Checked]
Trusses:
   Left truss type: Rafter truss
   Right truss type: Rafter truss
   Internal truss type: Rafter truss

Traditional – Patio canopy with gable depth trusses and poles

Dimensions:
   Width: 12’
   Height: 2’
   Depth: 10’
Main:
   Rafter spacing: 2’ 6”
   Internal down bar spacing: 2’ 6”
   Internal out bar spacing: 2’ 6”
   Has bottom bar: [Checked]
   Has side out bars: [Checked]
   Has side fabric: [Checked]
Sign Band:
   SB height: 6” [Checked]
   SB front support spacing: 2’
   SB side support spacing: 2’
Trusses:
   Left truss type: Gable depth truss
   Right truss type: Gable depth truss
   Internal truss type: Gable depth truss
   Left truss interval: 4’
   Right truss interval: 4’
   Internal truss interval: 4’
Poles:
   Pole height: 7’ [Checked]
   Pole diameter: 2”
   Pole type: Square
   Has front left pole/plate: [Checked]
   Has front right pole/plate: [Checked]
   Has back left pole/plate: [Checked]
   Has back right pole/plate: [Checked]
Pole Spacing:
   Left side spacing: 6’ [Checked]
   Right side spacing: 6’ [Checked]
   Front pole spacing: 6’ [Checked]
   Indent from left: 1.5”
   Indent from right: 1.5”
   Indent from front: 1.5”
   Indent from back: 1.5”
   Indent from top: 0”

Traditional – Entrance awning with raised bottom bar

Dimensions:
   Width: 6’
   Height: 2’
   Depth: 2’
Main:
   Bottom bar offset: 8” [Checked]

Traditional – Wraparound inside corner

Dimensions:
   Width: 6’
   Height: 2’
   Depth: 2’
Other awnings:
   Added Traditional Inside Corner to right side of Traditional.
   Added 2nd Traditional with same settings as 1st Traditional.
Valance:
   Added Wave1 valance
Materials:
   Applied Sunbrella Linen fabric

Traditional – Wraparound square corner

Dimensions:
   Width: 6’
   Height: 2’
   Depth: 2’
Sign Band:
   SB height: 6” [Checked]
Other awnings:
   Added Traditional Square Corner to right side of Traditional.
   Added 2nd Traditional with same settings as 1st Traditional.
Materials:
   Applied Sunbrella Linen fabric

Traditional – Wraparound straight corner

Dimensions:
   Width: 6’
   Height: 2’
   Depth: 2’
Sign Band:
   SB height: 6” [Checked]
Other awnings:
   Added Traditional Straight Corner to right side of Traditional.
   Added 2nd Traditional with same settings as 1st Traditional.
Materials:
   Applied Sunbrella Linen fabric

Traditional – Awning for stairway with landings mounted on side of building

Dimensions:
   Width: 6’
   Height: 2’
   Depth: 2’
Other awnings:
   Added Traditional Bottom Corner to right side of Traditional.
   Added 2nd Traditional with same settings as 1st Traditional.
   Added Traditional Top Corner.
   Added 3rd Traditional with same settings as 1st Traditional.
Materials:
   Applied Sunbrella Linen fabric

Traditional Gable Marquee Combo - Offset gable peak with flush gable

Dimensions:
    Width: 6’
    Height: 2’
    Depth: 3’
Sign Band:
    SB height: 2” [Checked]
    Separate SB Fabric: [Checked]
Gable:
    Gable width: 3'
    Gable top offset: 6"
    Gable width offset: -1'
Materials:
    Applied Sunbrella Sunflower Yellow fabric to awning
    Applied Sunbrella Jockey Red fabric to front and side sign band panels
Other objects:
    Added text "Hot” to Gable front fabric, changed font to California FB, added red to Stroke and changed thickness to 3, resized object to 9.5" x 4.64", moved to top of Gable front fabric.
    Added text "Pizza” to Gable front fabric, changed font to California FB, added red to Stroke and changed thickness to 3, resized object to 1' 8" x 7.71", moved to bottom of Gable front fabric.

Traditional Gable Marquee Combo - Centered gable peak with extended gable

Dimensions:
    Width: 6’
    Height: 2’
    Depth: 3’
Gable:
    Gable width: 4'
    Gable top offset: 6"
    Gable front depth: 1'
Valance:
    Added Wave1 valance
Materials:
    Applied Sunbrella Terra Cotta fabric to awning
Other objects:
    Added text "Entrance” to Gable front fabric, changed font to Lucida Calligraphy, changed color to white, resized object to 2' 8" x 4.88", moved to bottom of Gable front fabric.

Traditional Roof – Outdoor canopy with round poles

Dimensions:
   Width: 10’
   Height: 2’
   Depth: 5’
Sign Band:
   SB height: 6” [Checked]
Poles:
   Pole height: 7’ [Checked]
   Pole width: 2”
   Pole type: Round
Materials:
   Applied Sunbrella Cooper Navy

Traditional Roof – Wraparound outside corner

Dimensions:
   Width: 6’
   Height: 2’
   Depth: 5’
Other awnings:
   Added Traditional Roof Square Corner to left side of Traditional Roof
   Added 2nd Traditional Roof with same settings as 1st Traditional Roof.

Waterfall Retractable – Awning with dimensions

Dimensions:
   Width: 6’
   Height: 3’
   Depth: 3’
Valance:
   Added Wave1 valance
Materials:
   Applied Sunbrella Linen fabric
Other objects:
   Added “All Dimensions” then clicked on the Depth dimension and changed its Indent to 1 to move it below the left valance.
   Used the “Add Custom Dimension” feature to add a dimension for the height of the valance. Before using this feature, zoomed in on left back corner so the dimension end points would be accurate.

Awning Composer® and Trivantage® are registered trademarks of Glen Raven, Inc. Copyright © 2017.
Privacy Policy | Terms of Use | Trademarks